$55.47 Buy It Now or Best Offer
free,30-Day Returns
Seller Store
() %,
Location: Ontario, California, United States
Ships to: US,
Item: 292714615291
Condition:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab
Placement on Vehicle:Front, Left, Right, Upper, Lower
Type:Tie Rod Linkage
Universal Fitment:No
Items Included:Mounting Hardware
Custom Bundle:Yes
Interchange Part Number:ES3492T EV370 K6539 K6540
OE/OEM Part Number:Suspension Steering Tie Rod Ends Linkages Assembly,Ball Joints
Superseded Part Number:Front Driver and Passenger Side Replacement
Manufacturer Warranty:10 Year
ECCPP:ECCPP
UPC:Does not apply
Manufacturer Part Number:E81055802CP
Adjustable:Yes
Greasable or Sealed:Greasable
Surface Finish:Premium Quality
Kit Included:8 Pieces
Cross Reference Part Number:1999 2000 2001 2002 2003 2004 2005 2006 2007
Cross Part Number:For Chevrolet Silverado 1500 , GMC Sierra 1500
Partlink Number:Tie Rod End and Ball Joint
Bundle Description:Tie Rod End,Ball Joint,Ball Joint
Features:Greasable
Finish:Coated
Material:Alloy Steel
Mounting Style:Bolt-On
Cotter Pin Hole:Yes
eBay 1.Fit For Chevrolet Silverado 1500 4.3L 1999-2006 Chevrolet Silverado 1500 4.8L 1999-2006 Chevrolet Silverado 1500 5.3L 1999-2006 Chevrolet Silverado 1500 6.0L 2003-2006 Chevrolet Silverado 1500 Classic 4.3L 2007 Chevrolet Silverado 1500 Classic 4.8L 2007 Chevrolet Silverado 1500 Classic 5.3L 2007 Chevrolet Silverado 1500 Classic 6.0L 2007 GMC Sierra 1500 4.3L 1999-2006 GMC Sierra 1500 4.8L 1999-2006 GMC Sierra 1500 5.3L 1999-2006 GMC Sierra 1500 6.0L 2001-2006 GMC Sierra 1500 Classic 4.3L 2007 GMC Sierra 1500 Classic 4.8L 2007 GMC Sierra 1500 Classic 5.3L 2007 GMC Sierra 1500 Classic 6.0L 2007 2.Package Includes: 8pcs For 1999-2006 Chevy Silverado 1500 Front Tie Rod Ball Joint Kit 2WD RWD 1.Fit For Chevrolet Silverado 1500 4.3L 1999-2006 Chevrolet Silverado 1500 4.8L 1999-2006 Chevrolet Silverado 1500 5.3L 1999-2006 Chevrolet Silverado 1500 6.0L 2003-2006 Chevrolet Silverado 1500 Classic 4.3L 2007 Chevrolet Silverado 1500 Classic 4.8L 2007 Chevrolet Silverado 1500 Classic 5.3L 2007 Chevrolet Silverado 1500 Classic 6.0L 2007 GMC Sierra 1500 4.3L 1999-2006 GMC Sierra 1500 4.8L 1999-2006 GMC Sierra 1500 5.3L 1999-2006 GMC Sierra 1500 6.0L 2001-2006 GMC Sierra 1500 Classic 4.3L 2007 GMC Sierra 1500 Classic 4.8L 2007 GMC Sierra 1500 Classic 5.3L 2007 GMC Sierra 1500 Classic 6.0L 2007 2.Package Includes: 2x Part# Front Outer Tie Rods Ends Links – ES3492T 2x Part# Front Inner Tie Rods Ends Links – EV370 2x Part# Front Suspension Lower Ball Joints – K6539 2x Part# Front Suspension Upper Ball Joints – K6540 Notes (1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile. (2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests. (3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is at the bottom of this page. If you are interested with any other suspension parts, please click and save our store. Ball Joint Replacement Guideline: If there is a knocking or clunking noise in the area of the front axle when the car is traveling over road bumps, potholes or curbs, then there is usually a defect in a component of the wheel suspension. Picture(A) The side of the front axle from which the (vibration) noise is emanating can already be determined during a test drive. The type of noise also already provides certain indications for maintenance regarding which components might be faulty. Picture(B) 1.Raise the vehicle and remove the front wheels. 2.To loosen the fastening screws and fixing nuts of the compression ball joint more easily, spray them with rust remover and allow to act for a few minutes. Picture(C) 3.Loosen the fastening screws of the broken ball joint on the control arm and remove the nuts. Picture(D) 4.Loosen and remove the fixing nut of the ball joint on the steering knuckle. Tip:If the ball stud rotates, hold the ball stud in place with a hexagon socket. Picture(E) 5.Remove the bad or worn ball joint from the control arm. 6.Loosen the compression ball joint on the steering knuckle using a suitable special tool. Picture(F) 7.Clean the cone connection. Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to the contact surface. Picture(G) 8.Insert new compression ball joint in the control arm and steering knuckle and tighten with new fixing nuts. 9.Reinstall front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. 10.Measure the chassis and adjust it using the various holes on the compression ball joint if necessary. 11.Finally, carry out a test drive. Sway Bar Stabilizer Link Replacement Guideline: While driving, the following signs may indicate a faulty sway bar stabilizer link: (1).Rattling and thumping noises on rough roads. (2).Imprecise vehicle handling. (3).Stronger inclination of the vehicle during cornering. If the sway bar stabilizer link is found to be defective, it should be replaced as described below. Picture(A) 1.Raise vehicle and remove front wheels. Tip:Always check both stabilizer links and replace them in pairs if necessary. 2.Spray fastening nuts of the stabilizer link with rust remover and let act for a few minutes. Picture(B) 3.Loosen the lower fastening nut of the stabilizer link at the stabilizer and remove. Tip:If the ball stud also starts to turn, hold it with a suitable tool. 4.Press stabilizer link out of torsion bar. Picture(C) 5.Loosen the upper fastening nut of the stabilizer link at the suspension strut and remove it. Tip:If the ball stud also starts to turn, hold it with a suitable tool. Picture(D) 6.Press stabilizer link at suspension strut out of bracket. Picture(E) 7.Insert new stabilizer link at suspension strut. Picture(F) 8.Tighten stabilizer link at suspension strut to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(G) 9.Insert new stabilizer link at stabilizer. 10.Tighten stabilizer link at stabilizer to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(H) 11.Remount the front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. Tip:Even if replacing the stabilizer link does not directly affect the chassis setting, we recommend checking the axle setting and adjusting if necessary after working on the suspension. 12.Conclude with a test drive. Tie-Rod End Replacement Guideline: If you feel a bump in the steering when driving over road bumps or curbs, this might be due to worn tie rod ends or inner tie rods. Clicking noises during sudden steering movements can also be symptoms of a defective tie rod. In order to determine the exact cause and replace the defective tie rod, the car must be elevated with a vehicle lift in order to be examined more closely. This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod. Picture(A) Note: Cleanliness is extremely important when working on the power steering. Incorrect work and contamination can lead to leakage and, in the worst case, to failure of the steering assistance. 1.Lift the vehicle and dismount the front axle wheels. 2.Spray the fastening nut of the tie rod end with rust remover and leave it on for a few minutes. Picture(B) 3.Dismount the front underride guard. Picture(C) 4.Loosen the fastening nut from the tie rod and remove it completely. 5.Remove the tie rod end from the steering knuckle using an appropriate ball joint separator. Picture(D) 6.Remove the clamp of the bellow on the steering gear. 7.Push the bellow towards the tie rod end. Picture(E) 8.Unscrew the inner tie rod from the rack. 9.Clean the sealing face of the bellow at the steering gear. Picture(F) 10.Clean the lug of the rubber contact surface of the ball joint in the steering knuckle. Note:Always use new self-locking nuts and bolts for a reliable repair. 11.Screw the new inner tie rod into the rack and tighten it with the tightening torque that has been specified by the vehicle manufacturer. Picture(G) 12.Mount the bellow and close the clamps with the appropriate special tool. Note:Incorrect mounting of the bellow can lead to corrosion of the rack: the steering gear starts leaking which can lead to a failure in the steering assistance. Picture(H) 13.Secure the ball joint in the steering knuckle and mount the nut. Please observe the tightening torque suggested by the vehicle manufacturer. Note:During mounting, the ball stud should not turn within the ball joint. This can cause damage inside the ball joint and can lead to early failure. Tip:Secure the ball stud against twisting with a suitable tool. Picture(I) 14.Mount the front underride guard. 15.Mount the front wheels and tighten them with the tightening torque recommended by the vehicle manufacturer. 16.Align the wheels and adjust them if necessary. Observe the vehicle manufacturer specifications. 17.Perform a test drive. Note:When performing the test drive, pay special attention to the handling while cornering and listen for possible noise emission. Frequently Asked Questions (1).Do I need to replace the control arm if the bushings are worn? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (2).What happens if a ball joint breaks? When a ball joint breaks, you will hear a mysterious noise inside your car wheel. Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control. If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious. Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car. (3).What happens if I don’t replace ball joints? If you don’t want to replace your ball joints, then get ready to experience some serious issues. The old ball joints cause mysterious clunking noise or drifting steering. Once they are worn-out, it will seriously affect your steering and suspension. However, you do not need to change the ball joints if it is new. (4).Do I need to grease new ball joints? I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation. Follow the instruction card. (5).Why should I get my tie rods inspected on a regular basis? If you don’t get your tie rods inspected on a regular basis, there are some warning signs to watch (and listen) for. If your vehicle pulls to one side while driving, or when braking, it’s possible that bad tie rods may be the culprit. Your vehicle’s tires will also show uneven wear on the inside and outside edge of the tire when there’s a tire rod issue. However, one of the most noticeable signs of tie rods going bad will be a knocking sound coming from the front end of the vehicle when you turn into a parking space, or some other low speed, tight turning situation. (6).Vibrations One of the first symptoms that your tie rods are damaged or breaking is that the steering wheel will vibrate slightly. This is especially prevalent when you are speeding up or turning. This happens because the steering wheel is losing its control over the tires, causing the steering wheel to shimmy as you drive. (7).Shaking As the tie rods become further damaged, you will start to notice that the car itself will start to shake. This happens because the tires may start to wobble without you having full control over them. Although you should take your car into a mechanic at the first sign of tie rod problems, if you experience your car shaking you could be at risk for serious tie rod damage-which can cause accidents. Take your car into a mechanic if you experience this tie rod symptom. (8).Wandering If your tie rods continue to go unchecked or unfixed, the rods can completely break. This can cause you to lose all control of your car, possibly resulting in an accident. When this occurs, the car will may “wander” as you drive. At this point, the steering wheel will have no control over the tires and the tires will start moving independently, causing the car to drift while you are driving. If this happens while you are on a freeway or busy road, you and others could be at serious risk of an accident. If you experience wandering, stop your car, call a tow truck and take your car to the nearest mechanic. (9).What are the symptoms of a bad sway bar? Some of the common symptoms of a bad sway bar bushing or sway bar links going bad are: clunking noise, rattling noise, knocking uneven noise road, lack of stability when driving and noise going over speed bumps. poor handling during turns. (10).What happens when a sway bar breaks? Because a sway bar helps the car’s suspension to put more pressure on loaded springs, a broken sway bar means that the car’s suspension will not be able to handle corners as well or as quickly. While it is possible to drive with a broken sway bar, as a precaution do not take corners with excessive speeds. Item Specifics Placement on Vehicle Front Type Tie Rod Linkage Universal Fitment No Items Included Mounting Hardware Custom Bundle Yes Interchange Part Number ES3492T EV370 K6539 K6540 OE/OEM Part Number Suspension Steering Tie Rod Ends Linkages Assembly,Ball Joints Superseded Part Number Front Driver and Passenger Side Replacement Manufacturer Warranty 10 Year Brand ECCPP Manufacturer Part Number E81055802CP Adjustable Yes Greasable or Sealed Greasable Kit Included Surface Finish Premium Quality Kit Included 8 Pieces Cross Reference Part Number 1999 2000 2001 2002 2003 2004 2005 2006 2007 Cross Part Number For Chevrolet Silverado 1500 , GMC Sierra 1500 Partlink Number Tie Rod End and Ball Joint Bundle Description Tie Rod End,Ball Joint,Ball Joint Features Greasable Finish Coated Material Alloy Steel Mounting Style Bolt-On Cotter Pin Hole Yes Item Specifics Placement on Vehicle Front Type Tie Rod Linkage Universal Fitment No Items Included Mounting Hardware Custom Bundle Yes Interchange Part Number ES3492T EV370 K6539 K6540 OE/OEM Part Number Suspension Steering Tie Rod Ends Linkages Assembly,Ball Joints Superseded Part Number Front Driver and Passenger Side Replacement Manufacturer Warranty 10 Year Brand ECCPP Manufacturer Part Number E81055802CP Adjustable Yes Greasable or Sealed Greasable Kit Included Surface Finish Premium Quality Kit Included 8 Pieces Cross Reference Part Number 1999 2000 2001 2002 2003 2004 2005 2006 2007 Cross Part Number For Chevrolet Silverado 1500 , GMC Sierra 1500 Partlink Number Tie Rod End and Ball Joint Bundle Description Tie Rod End,Ball Joint,Ball Joint Features Greasable Finish Coated Material Alloy Steel Mounting Style Bolt-On Cotter Pin Hole Yes Discount Targeted Disounts Terms (1).Targeted Discount Terms only apply to auto parts purchased from ECCPPAUTOPARTS, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items. (3).Targeted Discount will be refunded from buyer’s payment, which means ECCPPAUTOPARTS won’t provide any extra targeted discounts if full refund is issued. Targeted Shipping Discount (4).Since our warehouse is located in Los Angeles, California, therefore you are qualified for extra 2% targeted shipping discount off the item sales if shipping address of your order is in California(CA), Washington(WA), Oregon(OR), Nevada(NV). If you have reached this targeted shipping discount threshold, please contact our customer services after you received all your items. Note: Item sales means your payment for the product(s) only, excluding shipping and handling charges, US internet sales taxes. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).ECCPPAUTOPARTS has the final power of interpretation of all the above Targeted Discount Terms and Procedures. Shipping WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. (1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available. (2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. (3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available. (4).Global Shipping Program is temporarily not available due to the reason for package dimensions. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received. (7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Warranty Items valued over $15 on eBay that include a warranty or service contract must contain additional details in seller’s listing description. 10 Year Warranty Terms and Procedures (1).The warranty terms only apply to the auto parts purchased from ECCPPAUTOPARTS, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).ECCPPAUTOPARTS carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements. (3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period. (4).ECCPPAUTOPARTS promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise ECCPPAUTOPARTS has the right to refuse any replacement requests. (5).ECCPPAUTOPARTS promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise ECCPPAUTOPARTS has the right to refuse any replacement requests. (6).ECCPPAUTOPARTS carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly. (7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately. (8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price. (9).ECCPPAUTOPARTS has the final power of interpretation of the above 10 Year Warranty Terms and Procedures. Return (1).Most of items support 60 Days Money Back Guarantee. (2).Refunds will be credited within 2 or 3 business days after returned item(s) is received. Best Sales 2 For Ford F150 Excursion Ranger 1998 1999 2000-2010 Remote Keyless Entry System USD 7.29 Front Wheel Hub Bearing For Chevy Monte Carlo Impala Cadillac Eldorado DTS FWD USD 40.38 Pair For 2007-2014 Chevy Silverado Sierra Towing Power Heated LED Signal Mirrors USD 107.99 ECCPP 2 Pcs Wheel Hub Bearing Front For Buick LaCrosse Century Regal Lesabre FWD USD 60.95 Universal 12V Low Pressure 5-9 PSI Electric Fuel Pump Installation Kit E8012S USD 16.49 Newly Listed For 2008-2010 Dodge Avenger Front Right Power Window Regulator Assembly USD 63.55 For Ford F-250 Super Duty 1999-2012 Rear Left Power Window Regulator Assembly USD 53.95 For 2008-2010 Dodge Avenger Front Left Power Window Regulator Assembly USD 60.95 Front Ceramic Brake Pads And Rotors For Acura ILX Honda Civic 05-06 Honda CR-V USD 92.99 For 2000-2006 Lincoln LS Rear Left Power Window Regulator Assembly USD 50.95 8pcs For 1999-2006 Chevy Silverado 1500 Front Tie Rod Ball Joint Kit 2WD RWD 1.Fit For Chevrolet Silverado 1500 4.3L 1999-2006 Chevrolet Silverado 1500 4.8L 1999-2006 Chevrolet Silverado 1500 5.3L 1999-2006 Chevrolet Silverado 1500 6.0L 2003-2006 Chevrolet Silverado 1500 Classic 4.3L 2007 Chevrolet Silverado 1500 Classic 4.8L 2007 Chevrolet Silverado 1500 Classic 5.3L 2007 Chevrolet Silverado 1500 Classic 6.0L 2007 GMC Sierra 1500 4.3L 1999-2006 GMC Sierra 1500 4.8L 1999-2006 GMC Sierra 1500 5.3L 1999-2006 GMC Sierra 1500 6.0L 2001-2006 GMC Sierra 1500 Classic 4.3L 2007 GMC Sierra 1500 Classic 4.8L 2007 GMC Sierra 1500 Classic 5.3L 2007 GMC Sierra 1500 Classic 6.0L 2007 2.Package Includes: 2x Part# Front Outer Tie Rods Ends Links – ES3492T 2x Part# Front Inner Tie Rods Ends Links – EV370 2x Part# Front Suspension Lower Ball Joints – K6539 2x Part# Front Suspension Upper Ball Joints – K6540 Notes (1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile. (2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests. (3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is at the bottom of this page. If you are interested with any other suspension parts, please click and save our store. Ball Joint Replacement Guideline: If there is a knocking or clunking noise in the area of the front axle when the car is traveling over road bumps, potholes or curbs, then there is usually a defect in a component of the wheel suspension. Picture(A) The side of the front axle from which the (vibration) noise is emanating can already be determined during a test drive. The type of noise also already provides certain indications for maintenance regarding which components might be faulty. Picture(B) 1.Raise the vehicle and remove the front wheels. 2.To loosen the fastening screws and fixing nuts of the compression ball joint more easily, spray them with rust remover and allow to act for a few minutes. Picture(C) 3.Loosen the fastening screws of the broken ball joint on the control arm and remove the nuts. Picture(D) 4.Loosen and remove the fixing nut of the ball joint on the steering knuckle. Tip:If the ball stud rotates, hold the ball stud in place with a hexagon socket. Picture(E) 5.Remove the bad or worn ball joint from the control arm. 6.Loosen the compression ball joint on the steering knuckle using a suitable special tool. Picture(F) 7.Clean the cone connection. Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to the contact surface. Picture(G) 8.Insert new compression ball joint in the control arm and steering knuckle and tighten with new fixing nuts. 9.Reinstall front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. 10.Measure the chassis and adjust it using the various holes on the compression ball joint if necessary. 11.Finally, carry out a test drive. Sway Bar Stabilizer Link Replacement Guideline: While driving, the following signs may indicate a faulty sway bar stabilizer link: (1).Rattling and thumping noises on rough roads. (2).Imprecise vehicle handling. (3).Stronger inclination of the vehicle during cornering. If the sway bar stabilizer link is found to be defective, it should be replaced as described below. Picture(A) 1.Raise vehicle and remove front wheels. Tip:Always check both stabilizer links and replace them in pairs if necessary. 2.Spray fastening nuts of the stabilizer link with rust remover and let act for a few minutes. Picture(B) 3.Loosen the lower fastening nut of the stabilizer link at the stabilizer and remove. Tip:If the ball stud also starts to turn, hold it with a suitable tool. 4.Press stabilizer link out of torsion bar. Picture(C) 5.Loosen the upper fastening nut of the stabilizer link at the suspension strut and remove it. Tip:If the ball stud also starts to turn, hold it with a suitable tool. Picture(D) 6.Press stabilizer link at suspension strut out of bracket. Picture(E) 7.Insert new stabilizer link at suspension strut. Picture(F) 8.Tighten stabilizer link at suspension strut to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(G) 9.Insert new stabilizer link at stabilizer. 10.Tighten stabilizer link at stabilizer to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(H) 11.Remount the front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. Tip:Even if replacing the stabilizer link does not directly affect the chassis setting, we recommend checking the axle setting and adjusting if necessary after working on the suspension. 12.Conclude with a test drive. Tie-Rod End Replacement Guideline: If you feel a bump in the steering when driving over road bumps or curbs, this might be due to worn tie rod ends or inner tie rods. Clicking noises during sudden steering movements can also be symptoms of a defective tie rod. In order to determine the exact cause and replace the defective tie rod, the car must be elevated with a vehicle lift in order to be examined more closely. This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod. Picture(A) Note: Cleanliness is extremely important when working on the power steering. Incorrect work and contamination can lead to leakage and, in the worst case, to failure of the steering assistance. 1.Lift the vehicle and dismount the front axle wheels. 2.Spray the fastening nut of the tie rod end with rust remover and leave it on for a few minutes. Picture(B) 3.Dismount the front underride guard. Picture(C) 4.Loosen the fastening nut from the tie rod and remove it completely. 5.Remove the tie rod end from the steering knuckle using an appropriate ball joint separator. Picture(D) 6.Remove the clamp of the bellow on the steering gear. 7.Push the bellow towards the tie rod end. Picture(E) 8.Unscrew the inner tie rod from the rack. 9.Clean the sealing face of the bellow at the steering gear. Picture(F) 10.Clean the lug of the rubber contact surface of the ball joint in the steering knuckle. Note:Always use new self-locking nuts and bolts for a reliable repair. 11.Screw the new inner tie rod into the rack and tighten it with the tightening torque that has been specified by the vehicle manufacturer. Picture(G) 12.Mount the bellow and close the clamps with the appropriate special tool. Note:Incorrect mounting of the bellow can lead to corrosion of the rack: the steering gear starts leaking which can lead to a failure in the steering assistance. Picture(H) 13.Secure the ball joint in the steering knuckle and mount the nut. Please observe the tightening torque suggested by the vehicle manufacturer. Note:During mounting, the ball stud should not turn within the ball joint. This can cause damage inside the ball joint and can lead to early failure. Tip:Secure the ball stud against twisting with a suitable tool. Picture(I) 14.Mount the front underride guard. 15.Mount the front wheels and tighten them with the tightening torque recommended by the vehicle manufacturer. 16.Align the wheels and adjust them if necessary. Observe the vehicle manufacturer specifications. 17.Perform a test drive. Note:When performing the test drive, pay special attention to the handling while cornering and listen for possible noise emission. Frequently Asked Questions (1).Do I need to replace the control arm if the bushings are worn? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (2).What happens if a ball joint breaks? When a ball joint breaks, you will hear a mysterious noise inside your car wheel. Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control. If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious. Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car. (3).What happens if I don’t replace ball joints? If you don’t want to replace your ball joints, then get ready to experience some serious issues. The old ball joints cause mysterious clunking noise or drifting steering. Once they are worn-out, it will seriously affect your steering and suspension. However, you do not need to change the ball joints if it is new. (4).Do I need to grease new ball joints? I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation. Follow the instruction card. (5).Why should I get my tie rods inspected on a regular basis? If you don’t get your tie rods inspected on a regular basis, there are some warning signs to watch (and listen) for. If your vehicle pulls to one side while driving, or when braking, it’s possible that bad tie rods may be the culprit. Your vehicle’s tires will also show uneven wear on the inside and outside edge of the tire when there’s a tire rod issue. However, one of the most noticeable signs of tie rods going bad will be a knocking sound coming from the front end of the vehicle when you turn into a parking space, or some other low speed, tight turning situation. (6).Vibrations One of the first symptoms that your tie rods are damaged or breaking is that the steering wheel will vibrate slightly. This is especially prevalent when you are speeding up or turning. This happens because the steering wheel is losing its control over the tires, causing the steering wheel to shimmy as you drive. (7).Shaking As the tie rods become further damaged, you will start to notice that the car itself will start to shake. This happens because the tires may start to wobble without you having full control over them. Although you should take your car into a mechanic at the first sign of tie rod problems, if you experience your car shaking you could be at risk for serious tie rod damage-which can cause accidents. Take your car into a mechanic if you experience this tie rod symptom. (8).Wandering If your tie rods continue to go unchecked or unfixed, the rods can completely break. This can cause you to lose all control of your car, possibly resulting in an accident. When this occurs, the car will may “wander” as you drive. At this point, the steering wheel will have no control over the tires and the tires will start moving independently, causing the car to drift while you are driving. If this happens while you are on a freeway or busy road, you and others could be at serious risk of an accident. If you experience wandering, stop your car, call a tow truck and take your car to the nearest mechanic. (9).What are the symptoms of a bad sway bar? Some of the common symptoms of a bad sway bar bushing or sway bar links going bad are: clunking noise, rattling noise, knocking uneven noise road, lack of stability when driving and noise going over speed bumps. poor handling during turns. (10).What happens when a sway bar breaks? Because a sway bar helps the car’s suspension to put more pressure on loaded springs, a broken sway bar means that the car’s suspension will not be able to handle corners as well or as quickly. While it is possible to drive with a broken sway bar, as a precaution do not take corners with excessive speeds. Item Specifics Placement on Vehicle : Front Type : Tie Rod Linkage Universal Fitment : No Items Included : Mounting Hardware Custom Bundle : Yes Interchange Part Number : ES3492T EV370 K6539 K6540 OE/OEM Part Number : Suspension Steering Tie Rod Ends Linkages Assembly,Ball Joints Superseded Part Number : Front Driver and Passenger Side Replacement Manufacturer Warranty : 10 Year Brand : ECCPP Manufacturer Part Number : E81055802CP Adjustable : Yes Greasable or Sealed : Greasable Kit Included : Surface Finish : Premium Quality Kit Included : 8 Pieces Cross Reference Part Number : 1999 2000 2001 2002 2003 2004 2005 2006 2007 Cross Part Number : For Chevrolet Silverado 1500 , GMC Sierra 1500 Partlink Number : Tie Rod End and Ball Joint Bundle Description : Tie Rod End,Ball Joint,Ball Joint Features : Greasable Finish : Coated Material : Alloy Steel Mounting Style : Bolt-On Cotter Pin Hole : Yes Item Specifics Placement on Vehicle Front Type Tie Rod Linkage Universal Fitment No Items Included Mounting Hardware Custom Bundle Yes Interchange Part Number ES3492T EV370 K6539 K6540 OE/OEM Part Number Suspension Steering Tie Rod Ends Linkages Assembly,Ball Joints Superseded Part Number Front Driver and Passenger Side Replacement Manufacturer Warranty 10 Year Brand ECCPP Manufacturer Part Number E81055802CP Adjustable Yes Greasable or Sealed Greasable Kit Included Surface Finish Premium Quality Kit Included 8 Pieces Cross Reference Part Number 1999 2000 2001 2002 2003 2004 2005 2006 2007 Cross Part Number For Chevrolet Silverado 1500 , GMC Sierra 1500 Partlink Number Tie Rod End and Ball Joint Bundle Description Tie Rod End,Ball Joint,Ball Joint Features Greasable Finish Coated Material Alloy Steel Mounting Style Bolt-On Cotter Pin Hole Yes DiscountShippingWarrantyReturnFeedback Targeted Disounts Terms (1).Targeted Discount Terms only apply to auto parts purchased from ECCPPAUTOPARTS, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items. (3).Targeted Discount will be refunded from buyer’s payment, which means ECCPPAUTOPARTS won’t provide any extra targeted discounts if full refund is issued. Targeted Shipping Discount (4).Since our warehouse is located in Los Angeles, California, therefore you are qualified for extra 2% targeted shipping discount off the item sales if shipping address of your order is in California(CA), Washington(WA), Oregon(OR), Nevada(NV). If you have reached this targeted shipping discount threshold, please contact our customer services after you received all your items. Note: Item sales means your payment for the product(s) only, excluding shipping and handling charges, US internet sales taxes. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).ECCPPAUTOPARTS has the final power of interpretation of all the above Targeted Discount Terms and Procedures. WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. (1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available. (2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. (3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available. (4).Global Shipping Program is temporarily not available due to the reason for package dimensions. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received. (7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Items valued over $15 on eBay that include a warranty or service contract must contain additional details in seller’s listing description. 10 Year Warranty Terms and Procedures (1).The warranty terms only apply to the auto parts purchased from ECCPPAUTOPARTS, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).ECCPPAUTOPARTS carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements. (3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period. (4).ECCPPAUTOPARTS promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise ECCPPAUTOPARTS has the right to refuse any replacement requests. (5).ECCPPAUTOPARTS promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise ECCPPAUTOPARTS has the right to refuse any replacement requests. (6).ECCPPAUTOPARTS carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly. (7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately. (8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price. (9).ECCPPAUTOPARTS has the final power of interpretation of the above 10 Year Warranty Terms and Procedures. (1).Most of items support 60 Days Money Back Guarantee. (2).Refunds will be credited within 2 or 3 business days after returned item(s) is received. Copyright of ECCPP. All rights reserved.
Frequently Asked Questions About 8pcs For 1999-2006 Chevy Silverado 1500 Front Tie Rod Ball Joint Kit 2WD RWD in My Website
accountify.ca is the best online shopping platform where you can buy 8pcs For 1999-2006 Chevy Silverado 1500 Front Tie Rod Ball Joint Kit 2WD RWD from renowned brand(s). accountify.ca delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.
What are the best-selling 8pcs For 1999-2006 Chevy Silverado 1500 Front Tie Rod Ball Joint Kit 2WD RWD on accountify.ca?
accountify.ca helps you to shop online and delivers Fred Perry to your doorstep. The best-selling Fred Perry on accountify.ca are: Fred Perry Sweater Mens Small Blue Wool Blend England Italy Pullover Jumper Fred Perry men’s corduroy long sleeve button up shirt size S fred perry polo shirt twin tripped casual mens Casuals Size S , Small Navy Blue Fred Perry M3600 Cotton Polo Shirt UK Small Fred Perry Shirt Men’s Large Blue White Gingham Plaid Striped Long Sleeve Button 2002 Legacy First Inheritance By Fred Perry book anime comic graphic novel Fred Perry Twin Tipped Gingham Check Tartan Detail Polo Shirt Slim Fit XL Mod Fred Perry Shirt Men Large Blue Black Check Slim Fit Button Down Long Sleeve New Fred Perry Mens Shirt Medium Blue Green Stripe Casuals Button Down Mod Ska 100% wool dark grey Raf Simons For Fred Perry trousers Fred Perry Jumper Mens Extra Large Green Pullover Crew Casual Retro Mod 3444 Fred Perry Jersey Casual Shirt White/Black Cotton Trikot Mens Size M Mens Fred Perry Red V Neck Pullover Mod Retro Short Sleeve Small Fred Perry Classic Short Sleeve Shirt Size S FRED PERRY SHIRT BUTTONED PLAID CHECKS BLACK S SMALL LONG Fred Perry Classic Slim Fit Long Sleeve Striped Shirt Size S FRED PERRY STRIPE V-NECK HEAVY KNIT JUMPER SIZE XXL BNWT Fred Perry men’s Small Royal Blue V-neck Sweater DAMAGED Fred Perry Bomber Collar Long Sleeved Polo Shirt Size XXL “Excellent” FRED PERRY CLASSIC FIT sz M Black PINK W/ BLUE SEWN LOGO COLLAR POLO SHIRT Vintage Fred Perry Women’s Full Zip University Track Jacket Size M New Mexico St Fred Perry X Nigel Cabourn Polo Shirt Mens Size 46 Blue Short Sleeve Collared Gold Digger comic book A7 entertainment fred perry lot of 11 Fred Perry Polo Shirt Men’s XXXL Cream Twin Tipped Preppy Mesh Knit Casual BNWOT Fred Perry Track Jacket Mens size XL Fred Perry Jumper Mens Blue Wool Tartan Mods Sweater Casuals Terrace Small Gold Digger #32 (May 2002, Antarctic Press) Fred Perry w FRED PERRY CLASSIC CARDIGAN K9551 420 WOOL/COTTON STEEL MARL NEW WITH TAGS Fred Perry Classic Slim Fit Short Sleeve Shirt Size M – L Fred Perry Mod Ribbed Knit Tipped Polo – K5500 – Navy – Size L Vintage “ FRED PERRY “ Ladies 90’s Classic White & Pink Jacket Track Top Size 12 COMME DES GARCONS HOMME DEUX Black Fred Perry Edition Logo Bomber Jacket Fred Perry Texture Jumper Size M FRED PERRY ORIGINAL MEN CASUAL SHORT SLEEVE SHIRT T-SHIRT JERSEY SIZE M MEDIUM Fred Perry Men’s NEW Crew Neck Short Sleeve Tennis Shirt Series T-Shirt Tee Fred Perry embroidred mens sweat Shorts Size M High Quality Vintage Fred Perry Shorts Mens 30 Waist Fred Perry Classic Slim Fit Short Sleeve Shirt Size M Fred Perry Men’s Short Sleeve Shirt Formal/Casual Shirt Size Small Fred Perry men’s polo 116cm Fred Perry Shell Parka Black UK10 / US6 New With Tags Fred PerryTwin Tipped Zip Up Cardigan Size XL Fred Perry Shirt L Large Mens Red Plaid Regular Fit Casual Short Sleeve M2311 Classic Vintage “ FRED PERRY “ Black 100% Cotton Polo T Shirt 🔥Size XXL 46/48 Fred Perry Polo Shirt Mens XL Blue Short Sleeve Twin Tipped A8-A7 Fred Perry Jacket Men Extra Large Bomber Windbreaker Fleece Lined Logo Mod Retro Vintage Fred Perry Sweater Vest Adult XL White Sportswear Cable Knit Casual Mens Fred Perry Sweater Lambswool / Polyamide Size M / L **46G0801p Fred Perry Polo Shirt Men’s Size Small – Black / Yellow Fred Perry Shirt Mens Medium Blue White Gingham Check Short Sleeve Casual Fred Perry Amy Winehouse Black Pink Tartan Polo Shirt 10 Fred Perry Long Sleeve Zip Through Polo Shirt M4709 F36 Shaded Navy New Size XL Fred Perry x Beams Japan Striped Oversized Laurel Embroidered Cotton T Shirt M Fred Perry Men`s Khaki Canvas “Shield” Fishtail FullZip Hooded Parka Size XL Medium Fred Perry Ringer All Cotton Navy short sleeve T-shirt New FRED PERRY TIPPED HALF ZIP JUMPER BLACK K4546 102 NEW WITH TAGS Fred Perry Men’s Blue Navy Terrace Casuals Jacket Size S Fred Perry SS Polo Shirt Logo UK England Made Size 38/Medium Men EUC Fred Perry Shirt Mens Medium Green Button Up Long Sleeve A5-B7 Vintage 90s Fred-Perry Full-Zip Sweatshirt Womens Small 17×20 Embroidered-Logo Fred Perry J6707 Black Track Jacket Women’s Size 38 or UK 10 or US 6 Fred Perry Sportswear Polo Shirt Knit Jumper Navy Blue Made in Italy Men’s 40” FRED PERRY Womens Sleeveless Polo Shirt UK 10 Small Beige Cotton GE04 FRED PERRY casual MENS TEE SHIRT T-SHIRT JERSEY ORIGINAL SIZE M Fred Perry men’s zip up bomber jacket J3515 medium beige cotton LJKTC269 FRED PERRY SEASONAL TAPED TRACK JACKET MIDNIGHT BLUE J4575 NEW WITH TAGS SIZE L Fred Perry x Amy Winehouse Twin Tipped Cardigan UK 10 Fred Perry Reissues Wool Turtle Neck Men’s Medium Cream Knit Sweater Logo Roll VTG Fred Perry Men’s 100% Cotton L/S Polo Shirt Red/Navy/Yellow/Green • Large Fred Perry Mens Polo Shirt Sz.Small/Green-Blue Logo/Red & Blue Striped Collar Women’s FRED PERRY Navy Crew Neck T Shirt Top Size S Fred Perry Polo Shirt Mens Extra Large Button Down Logo Golf Cotton Fred Perry Amy Winehouse Black Halter Neck Mini Dress – Size 10 Rare FRED PERRY 100% Merino Wool Mens Black 1/2 Zip Sweater Jumper Proud Small A Pair Of White Fred Perry Mod Culture Way Of Life Patches Sew / Iron On Badges Fred Perry Jacket Size M Hooded Blue Coat Laurel FRED PERRY Womens Crew Neck Jumper Sweater UK 12 Medium Grey Mohair EX08 Fred Perry Hoodie Mens Black Grey Check Full Zip Hooded Jacket Small / Medium FRED PERRY FRILL DETAIL PIQUE DRESS BLACK SIZE 6 BNWT RRP £99.99 SKA MOD CASUAL! Fred Perry Men Polo Shirt Large Blue Twin Tip Casuals Stripes Mods Retro Terrace Fred Perry Sportswear Vintage Full Zip Blue Red Stripe Track Jacket Sz M Fred Perry Polo Shirt Adult L blue Slim Fit plaid collar Ska Band Hardcore S/S Fred Perry men’s merc jacket in Navy FRED PERRY My First Fred Perry Shirt Size 6 – 12 Months Navy Blue SY1225 BNWT Fred Perry Men’s Lawn Leather Mesh Trainers White UK3, UK4, UK5 B6120 Fred Perry Puffer Vest Xxl Mens Fred Perry Blue Checked Cotton Shirt Size L Fred Perry Men’s Button Down Shirt Embroidered Logo Long Sleeve Plaid Size Small Fred Perry Red Check Shirt Two Colour Check Large 22”P2P Slim Fit Mod Scooter 80s 90s Vintage Fred Perry V Neck Knit Sweater Mens S White/Green Womens Fred Perry Cropped Polo Shirt Size 12 Fred Perry Polo Men’s XL Pink 100% Cotton Logo Embroidery Shirt M3600 Rare Fred Perry x Amy Winehouse Argyle Jumper Dress 12 Medium New & Tags Fred Perry stylish and timeless black Astors canvas flat ballerinas , Size US 9 FRED PERRY Polo Mens Large Twin Tipped Collar Navy Blue 100% Cotton Pique Shirt VINTAGE FRED PERRY ZIP THROUGH TRACK JACKET SIZE XL YOUTH MAY FIT XS ADULT VGC FRED PERRY MEN’S POLO T-SHIRTS ENGLAND LONDON 100% COTTON SIZE XL BLUE Women’s Fred Perry Full Zip Track Jacket Sportswear Casual Size UK 12 USA 8 Fred Perry men’s shirt L Fred Perry Polo Shirt Mens Large Blue Striped Mod Retro Colourblock Casual 3305 Mens Pullover Fleece Hoodie